Reloop RSM-120 User Manual download pdf (Page 4)

ENGLISH

Congratulations on purchasing the Reloop RSM-120. Thank you for placing your trust in our technology.

Before operating this equipment we ask you to carefully study and observe all instructions.

Please remove the Reloop RSM-120 from its packaging. Before initial operation please make sure that the device has not been

visibly damaged during transport. If you detect any damage to the included cables or the casing, do not operate the device

and contact your specialised dealer.

SAFETY INSTRUCTIONS

CAUTION!

Any damage caused by the non-observance of this operation manual excludes any warranty claims. The

manufacturer is not liable for any damage to property or for personal injury caused by improper handling or

non-observance of the safety instructions.

- This device has left the factory in perfect condition. To maintain this condition and to ensure a risk-free operation the user

must observe the safety instructions and warnings contained in this operation manual.

- For reasons of safety and certication (CE) the unauthorised conversion and/or modication of the device is prohibited.

Please note that in the event of damage caused by the manual modication to this device any warranty claims are excluded.

- The inside of the device does not contain any parts which require maintenance, with the exception of wear parts that can be

exchanged from the outside. Only qualied staff must carry out maintenance, otherwise warranty does not apply!

- The fuse must exclusively be exchanged against fuses of the same class, with the same trigger features and nominal current

rating.

- Make sure that the power will only be supplied after the device has been fully set up. Always plug in the mains plug last.

Ensure that the mains switch is in the “OFF” position when connecting the device to power.

- Only use cables that comply with regulations. Make sure that all jacks and bushes are tightened and correctly hooked up.

Refer to your dealer if you have any questions.

- Ensure that when setting up the product the mains cable is not squashed or damaged by sharp edges.

- Prevent the mains cable from coming into contact with other cables! Exercise great care when handling mains cables and

connections. Never touch these parts with wet hands!

- Connect the power cable exclusively to appropriate shock-proof outlets. The only supply point to be used is a supply outlet in

accordance with specications of the public supply network.

- Disconnect the device from the supply outlet when not in use and before cleaning! Be sure to hold the mains plug by the

body. Never pull the mains cord!

- Position the device on a horizontal and stable low-ame base.

- Avoid any concussions or violent impact when installing or operating the device.

- When selecting the location of installation make sure that the device is not exposed to excessive heat, humidity, and dust. Be

sure that no cables lie around openly. You will endanger your own safety and that of others!

- Do not rest any containers lled with liquid that could easily spill onto the device or in its immediate vicinity. If, however,

uids should access the inside of the device, immediately disconnect the mains plug. Have the device checked by a qualied

service technician before re-use. Damage caused by uids inside the device is excluded from the warranty.

- Do not operate the device under extremely hot (in excess of 35° C) or extremely cold (below 5° C) conditions. Keep the de

vice away from direct exposure to the sun and heat sources such as radiators, ovens, etc. (even during transport in a closed

vehicle). Never cover the cooling fan or vents. Always ensure sufcient ventilation.

- The device must not be operated after being taken from a cold environment into a warm environment. The condensation

caused hereby may destroy your device. Do not switch on or operate the device until it has reached ambient temperature!

- Controls and switches should never be treated with spray-on cleaning agents and lubricants. This device should only be

cleaned with a damp cloth. Never use solvents or cleaning uids with a petroleum base for cleaning.

- When relocating, the device should be transported in its original packaging.

- When starting operation, the faders and volume controls of your amplier must be set to minimum level. Bring the loudspe

aker switches into the “OFF” position. Wait between 8 to 10 seconds before increasing the volume to avoid shot noise created

by transient effect, which could cause damage to loudspeakers and the diplexer.

- Devices supplied by voltage should not be left in the hands of children. Please exercise particular care when in the presence

of children.

- At commercial facilities the regulations for the prevention of accidents as stipulated by the organization of professional

associations must be observed.

- At schools, training facilities, hobby and self-help workshops the operation of the device must be monitored with responsibili

ty by trained staff.

- Keep this operation manual in a safe place for later reference in the event of questions or problems.

1 2 3 4 5 6 7 8

Comments to this Manuals

No comments

Reloop RSM-120 User Manual Page 4

Comments to this Manuals

Related products and manuals for Microphones Reloop RSM-120