Reloop beatpad Instruction Manual download pdf (Page 11)

ENGLISH

Congratulations on purchasing the Reloop Beatpad. Thank you for placing your trust in our disc jockey technology. Before operating this equip-

ment we ask you to carefully study and follow all instructions.

Please remove the Reloop Beatpad from its packaging. Before initial operation please make sure that the device has not been visibly damaged

during transport. If you detect any damage to the power cable or the casing, do not operate the device and contact your specialised dealer.

SAFETY INSTRUCTIONS

CAUTION! Please exercise particular caution when handling AC 1,5A/6V, 60Hz/50Hz (optional) power voltage. This voltage rating may lead to

a critical electrical shock! Any damage caused by the non-observance of this operation manual excludes any warranty claims. The manufac-

turer is not liable for any damage to property or for personal injury caused by improper handling or non-observance of the safety instructions.

This device has left the factory in perfect condition. To maintain this condition and to ensure a risk-free operation the user must observe the safety

instructions and warnings contained in this operation manual.

For reasons of safety and certication (CE) the unauthorised conversion and/or modication of the device is prohibited. Please note that in the

event of damage caused by the manual modication to this device any warranty claims are excluded.

The inside of the device does not contain any parts which require maintenance, with the exception of wear parts that can be exchanged from the

outside. Only qualied staff must carry out maintenance, otherwise warranty does not apply!

The fuse must exclusively be exchanged against fuses of the same class, with the same trigger features and nominal current rating.

Make sure that the power will only be supplied after the device has been fully set up. Always plug in the mains plug last. Ensure that the mains

switch is in the “OFF” position when connecting the device to power.

Only use cables that comply with regulations. Make sure that all jacks and bushes are tightened and correctly hooked up. Refer to your dealer if

you have any questions.

Ensure that when setting up the product the mains cable is not squashed or damaged by sharp edges.

Prevent the mains cable from coming into contact with other cables! Exercise great care when handling mains cables and connections. Never touch

these parts with wet hands!

Connect the power cable exclusively to appropriate shock-proof outlets. The only supply point to be used is a supply outlet in accordance with

specications of the public supply network.

Disconnect the device from the supply outlet when not in use and before cleaning! Be sure to hold the mains plug by the body. Never pull the

mains cord!

Position the device on a horizontal and stable low-ame base.

Avoid any concussions or violent impact when installing or operating the device.

When selecting the location of installation make sure that the device is not exposed to excessive heat, humidity, and dust. Be sure that no cables

lie around openly. You will endanger your own safety and that of others!

Do not rest any containers lled with liquid that could easily spill onto the device or in its immediate vicinity. If, however, uids should access the

inside of the device, immediately disconnect the mains plug. Have the device checked by a qualied service technician before re-use. Damage

caused by uids inside the device is excluded from the warranty.

Do not operate the device under extremely hot (in excess of 35° C) or extremely cold (below 5° C) conditions. Keep the device away from direct

exposure to the sun and heat sources such as radiators, ovens, etc. (even during transport in a closed vehicle). Never cover the cooling fan or vents.

Always ensure sufcient ventilation.

The device must not be operated after being taken from a cold environment into a warm environment. The condensation caused hereby may des-

troy your device. Do not switch on or operate the device until it has reached ambient temperature!

Controls and switches should never be treated with spray-on cleaning agents and lubricants. This device should only be cleaned with a damp cloth.

Never use solvents or cleaning uids with a petroleum base for cleaning.

When relocating, the device should be transported in its original packaging.

Devices supplied by voltage should not be left in the hands of children. Please exercise particular care when in the presence of children.

At commercial facilities the regulations for the prevention of accidents as stipulated by the organization of professional associations must be

observed.

At schools, training facilities, hobby and self-help workshops the operation of the device must be monitored with responsibility by trained staff.

Keep this operation manual in a safe place for later reference in the event of questions or problems.

APPLICATION IN ACCORDANCE WITH REGULATIONS

This device is a professional DJ MIDI controller with integrated 4-channel soundcard that can control software. The device should be connected

via USB cable to a computer.

This product is authorised for connection to 100 - 240 V, 60/50 Hz AC via an optional mains adapter (sold separately) and is designed exclusively

for indoor application.

If the device is used for any other purposes than those described in the operation manual, damage can be caused to the product, leading to ex-

clusion of warranty rights. Moreover, any other application that does not comply with the speci ed purpose harbours risks such as short circuit,

 re, electrical shock, etc.

The serial number determined by the manufacturer must never be removed to uphold the warranty rights.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 35 36

Comments to this Manuals

No comments

Reloop beatpad Instruction Manual Page 11

Comments to this Manuals

Related products and manuals for DJ controllers Reloop beatpad