Reloop RMP-3 Instruction Manual download pdf (Page 24)



















Congratulations on purchasing your Reloop RMP-2.5 cross media player. Thank you for placing

your trust in our disc jockey technology. Before operating this equipment we ask you to carefully

study and follow all instructions.

Please remove the RMP-2.5 Alpha from its packaging. Before initial operation make sure that the

device did not suffer any visible damage during transport. If you detect any damage to the power

cable or the casing, do not operate the device. Contact your specialised dealer.















- This device left the works in perfect condition. To maintain this condition and to ensure a risk-

free operation the user has to follow the safety instructions and warnings contained in this

operation manual.

- For reasons of safety and certication (CE) the unauthorised conversion and/or modication of

the device is prohibited. Please note that in the event of damage, caused by manual modication

to this device, any implied warranty claims are excluded.

- The inside of the device does not contain any parts which require maintenance, with the excepti-

on of wear parts that can be exchanged from the outside. Qualied staff has to carry out mainte-

nance, otherwise the implied warranty does not apply!

- Ensure that power is only supplied after the device has been fully set up. Always plug in the

mains plug last. Ensure that the mains switch is in the „OFF“ position when connecting the de-

vice to power.

- Only use cables that comply with regulations. Observe that all jacks and bushes are tightened

and correctly hooked up. Refer to your dealer if you have any questions.

- When setting up the product make sure that the mains cable is not squashed or damaged by

sharp edges.

- Prevent the mains cable from coming into contact with other cables! Exercise great care when

handling mains cables and connections. Never touch these parts with wet hands!

- Connect the power cable exclusively to appropriate shock-proof outlets. The only supply point to

be used is a supply outlet in accordance with specications of the public supply network.

- Disconnect the device from the supply outlet when not in use and before cleaning! Be sure to

hold the mains plug by the body. Never pull the mains cord!

- Position the device on a horizontal and stable low-ame base.

- Avoid any concussions or violent impacts when installing or operating the device.

- When selecting the location of installation, make sure that the device is not exposed to excessive

heat, humidity, and dust. Be sure that no cables lie around openly. You will endanger your own

safety and that of others!

- Do not place any containers lled with liquid that could easily spill on the device or in its imme-

diate vicinity. If, however, uids should access the inside of the device, immediately disconnect

the mains plug. Have the device checked by a qualied service technician before re-use. Damage

caused by uids inside the device is excluded from the implied warranty.

- Do not operate the device under extremely hot (in excess of 35° C) or extremely cold (below 5°

C) conditions. Keep the device away from direct exposure to the sun and heat sources such as

radiators, ovens, etc. (even during transport in a closed vehicle).

- The device must not be operated after being taken from a cold environment into a warm environ-

ment. The condensation caused hereby may destroy your device. Do not switch on or operate the

device until it has reached ambient temperature!

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 67 68

Comments to this Manuals

No comments

Reloop RMP-3 Instruction Manual Page 24

Comments to this Manuals

Related products and manuals for CD players Reloop RMP-3